Antioxidant and anti-inflammatory activities of phenolic compounds extracted from lemon myrtle (Backhousia citriodora) leaves at various extraction conditions

Food Science and Biotechnology - Lemon myrtle leaves were extracted with ethanol at different temperatures (25, 50, and 80 °C) and times (2, 4, 6, and 10 h) to examine the...     

Computer‐aided design methodology for linearity enhancement of multiwatt GaN HEMT amplifiers using multiple parallel devices

This article presents a design methodology for linearizing GaN HEMT amplifiers based on splitting a large FET into multiple parallel FETs with same total gate periphery and by biasing them individually. By varying the biases, the magnitude and the phase of the IMD3 components at the output of FET changes. A detailed simulation methodology using commercial microwave CAD software is presented. Simulation results show that by biasing one device in Class AB and other(s) in deep Class AB mode, IMD3 components of parallel FETs can be made out of phase to each other leading to cancellation and improvement in linearity. Three prototype circuits were simulated using (a) a single 5 mm FET (1 × 5 mm), (b) two parallel 2.5 mm FETs (2 × 2.5 mm), and (c) four parallel 1.25 mm FETs (4 × 1.25 mm), for a total gate periphery of 5 mm, over the frequency range of 0.8 to 1.0 GHz. IMD3 improvement up to 20 dBc was achieved with the 4 × 1.25 mm circuit when the FET biases were optimized. Measurement results show improvement in linearity up to 20 dBc for 4 × 1.25 mm circuit. The proposed method improves linearity without a substantial penalty on the power consumption and is straightforward to implement.     

Enhancing nugget size and weldable current range of ultra-high-strength steel using multi-pulse resistance spot welding

ABSTRACT

This paper presents an innovative approach that uses a pulse-profile to improve the welding quality of CP1180 steel in resistance spot welding process. Three pulses with two cooling times were used in the developed multi-pulse welding (MPW) schedule. The experimental results show that the first pulse increases the contact area between the sheets to improve the current flow pattern. The second pulse was designed to extend the sheet-to-sheet contact area and corona bond for preventing rapid nugget growth. Using these designs, the nugget size was maximised through the third pulse. The maximum nugget size using the designed MPW schedule was 18.5% greater than that of the single-pulse welding schedule and the weldable current range was extended by 130%.     

Effect of coupling agent content on properties of composites made from polylactic acid and chrysanthemum waste

Chrysanthemum flower is among one of the highly sought after and widely planted flower crops, in particular for cultural and religious ceremonies. However, the chrysanthemum stem and stalk have little value and usually discard as by‐product waste from floristry. The objective of this research is to investigate the potential value of utilizing chrysanthemum stem and stalk as reinforcing fillers for thermoplastic composites. In this study, 2‐mm thick composite sheet containing predefined formulations of polylactic acid (PLA), chrysanthemum waste filler (CWF) ranging from 15 to 60 phr, and maleated polyethylene (MAPE) coupling agent up to 5 phr were prepared with the aid of Haake internal mixer and compression molding. The effect of MAPE loading on tensile, thermal, and morphological properties of PLA/CWF composites was investigated. The findings revealed that PLA/CWF composite attained improved tensile modulus compared to the neat PLA, and the tensile modulus increases with higher concentration of CWF. However, both tensile strength and elongation at break reduces with increase loading of CWF. Overall, PLA/CWF composites with MAPE shows better performance compared to those without MAPE, where an optimum strength of 21.8 MPa can be achieved with 60 phr CW and 3 phr MAPE. The measured tensile strength is comparable to alternatives natural fiber thermoplastic composites demonstrating its potential to be used in non‐structurally demanding application. J. VINYL ADDIT. TECHNOL., 26:10–16, 2020. © 2019 Society of Plastics Engineers     

Does interior color contrast enhance spatial memory?

This study investigated the effect of contrast in neutral-, warm-, and cool-colored spaces on spatial memory. Spatial memory was measured in terms of architectural scale and recollection of architectural elements and furniture. Participants (N = 114) viewed a short virtual simulation video of a residential studio and were asked to sketch a map of the architectural elements on distributed grid paper. Spatial memory was measured in terms of scale, and item recall rate. Contrast and hue had no significant effect on the memorization of proportional scale. However, high-contrast schemes allowed for a significantly higher recollection of architectural elements than low-contrast schemes. In comparing the effect of hues, a significant difference was seen in recalling detailed furniture and lighting items. Participants reported significantly better spatial memory of neutral and warm color schemes than of cool color schemes. There was no interaction effect between contrast and hue in the color combinations. These results can be applied in the design of color schemes for architectural spaces requiring enhanced spatial cognition and memory.     

Extensive evaluation and classification of low-cost dust sensors in laboratory using a newly developed test method

An extensive evaluation of low-cost dust sensors was performed using an exponentially decaying particle concentration. A total of 264 sensors including 27 sensors with light-emitting diodes (LEDs) and 237 sensors with laser lighting sources were tested. Those tested sensors were classified into 4 groups based on the deviation from the reference data obtained by a reference instrument. The response linearities of all the tested samples for PM₁, PM_2.5, and PM₁₀ were in excellent agreement with the reference instrument, except a few samples. For the measurements of PM₁ and PM_2.5, the lighting source, that is, LED or laser, did not show any significant difference in overall sensor performance. However, LED-based sensors did not perform well for PM₁₀ measurements. The 32, 24, and 16% of all the tested sensors for PM₁, PM_2.5, and PM₁₀ measurement, respectively, are in the category of Class 1 (reference instrument reading ± 20%) requirement. The performance of the low-cost dust sensors for PM₁₀ measurement was relatively less satisfactory.     

Changes in phenolics,soluble solids,vitamin C,and antioxidant capacity of various cultivars of hardy kiwifruits during cold storage

Food Science and Biotechnology - Hardy kiwifruits (Actinidia arguta) contain various bioactive compounds such as vitamin C and phenolics and can withstand cold temperatures. Changes in soluble...     

Thermal infrared image processing profiles for speech anxiety monitoring

Multimedia Tools and Applications - This study relates to a method for analyzing speech anxiety by processing biosignals in real time. In the previous study, the effect of galvanic skin response...     

A proposal of novel design on the WAVE MAC algorithm with low-latency for seamless video surveillance in V2X environment

Multimedia Tools and Applications - This paper proposed an MAC (Media Access Control) operation method based on the CCH (Control Channel) and SCH (Service Channel) control mode of the WAVE...